An application was received from Gregory McCarthy, requesting permission for a curb cut at the premises numbered 747 Cambridge Street; said petition has received approval from Inspectional Services, Traffic, Parking and Transportation, Historical Commission and Public Works. No response has been received from the neighborhood association

General Information Attestation Curb Cut 120380 Submitted On: May 11, 2021 Applicant Gregory McCarthy [phone removed] [email removed] Location 747 Cambridge St Cambridge, MA 02141 Frontage (in feet) 50 Setback - distance from building to sidewalk (in feet) 0 Distance from proposed driveway to surrounding structures and property line (in feet) 3 Length of proposed driveway (in feet) 3 Width of proposed driveway (in feet) 18.5 Size of proposed driveway (square feet) 55.5 Location of any trees, sign posts, fire hydrants, utility poles, etc., in direct vicinity of proposed driveway One "tow zone" sign in general vicinity Full Name Gregory McCarthy Date 05/11/2021 Page 1 of 1 6/9/2021 https://cambridgema.viewpointcloud.io/

OFFICE OF THE CITY CLERK CITY OF CAMBRIDGE [phone removed] FAX [phone removed] ANTHONY I. WILSON PAULA M. CRANE CITY CLERK DEPUTY CITY CLERK CITY HALL, 795 MASSACHUSETTS AVENUE CAMBRIDGE, MASSACHUSETTS 02139 Dear Neighborhood Representative: This office is in receipt of a copy of an application from: The City Council has directed that all curb cut petitions be submitted to the appropriate Neighborhood Associations for the locality where the curb cut would be made, so that the association may have an opportunity for review, prior to action by the City Council. Please indicate by return mail your approval or disapproval of the petition within twenty-one days from the date of this letter. If the response is "disapproval" please state reasons. Be sure to sign the form and include a daytime phone number. I have enclosed a self-addressed stamped envelope to facilitate your reply. As soon as this office has received both the completed application and your neighborhood association response, I will place the petition on the agenda for the next City Council meeting. If I do not receive a response from your neighborhood organization by twenty-one days from the date of this letter, I will place the petition on the agenda for the next City Council meeting. If your neighborhood association cannot complete its review by twenty-one days from today, you may extend the reply time another seven days by requesting an extension by letter to me with a copy to the petitioner. However, I urge you to make every effort to complete your review as soon as possible. Thank you for your cooperation. Sincerely yours, Anthony I. Wilson City Clerk hereby _______ approve _______ disapprove of said driveway petition. Comments: ____________________________________________________________________ Signature of authorized association representative Daytime telephone no. cc: Petitioner June 9, 2021 Gregory McCarthy for a change to an existing Curb Cut at the location of 747 Cambridge Street with changes being Frontage of 50', Setback 0', Distance from surrounding structures 3', Length 3', Width 18.5' and a total added Square Wellington Harrington - Neighborhood 3 Leadership Team, [email removed] RESET PRINT

UP UP RESIDENTIAL LOBBY MECHANICAL SPRINKLER DINING 1/2 BATH KITCHEN UNIT 1 FRAME FOR FUTURE WHEEL CHAIR LIFT COMMERCIAL SPACE BUILDING ABOVE BUILDING ABOVE BUILDING ABOVE EXT STORAGE UNDER STAIR BENCH PACAKAGES INTERCOM TRASH AND RECYCLING PANTRY PARKING SPACE #2 PARKING SPACE #3 PARKING SPACE #4 PARKING SPACE #8 PARKING SPACE #7 PARKING SPACE #6 PARKING SPACE #5 PARKING SPACE #1 ADA VAN ACCESSIBLE PARKING SPACE #9 PEDESTRIAN ALERT SYSTEM FOR PARKING GARAGES AND BLIND CORNERS CAR COMING PEDESTRIAN ALERT SAFETY SIGN PART 1 - GENERAL The intent of this document is to specify the minimum criteria for the design, supply, installation, and commissioning of a Pedestrian Alert Safety System used to notify pedestrians and street traffic of a vehicle exiting a parking facility or blind corner. 1.01 SUMMARY A CAR COMING Pedestrian Alert Safety System is designed to provide a clear visual and audible voice alert to pedestrian and street traffic when a vehicle is exiting a parking facility or blind corner. The alert system shall be self-contained with all controls of the system contained within the enclosure of the sign. The alert system shall be designed with aesthetics of the architecture of the facility in mind, and not to detract from the facility. 1.02 SYSTEM DESCRIPTION The CAR COMING Pedestrian Alert Safety System activates when a vehicle is detected exiting a parking facility. When activated the alert system provides a flashing amber alert, brightly backlit text indicating a “CAR COMING”, and a voice alert notifying nearby pedestrians. PART 2 - PRODUCTS 2.01 MANUFACTURED UNITS A.Model Number/Descriptions Table Pedestrian Alert System PASSCCCAR COMING, Pedestrian Alert Safety System with integrated PASS Controller Board. Mfg PASS Signs 2.02 TECHNICAL OVERVIEW The CAR COMING Pedestrian Alert Safety System activates when a vehicle is detected exiting a parking facility. When activated the alert system provides a flashing amber alert, brightly backlit text indicating a “CAR COMING”, and a voice alert notifying nearby pedestrians. SYSTEM ACTIVATION TRIGGERS The system can be activated by any detection device that has a normally open output contact that closes upon detection of the vehicle. Multiple devices, such as parking barriers or vehicle loop detectors, connected in parallel can be linked together to provide activation of the sign if any device detects a vehicle movement. TYPICAL SYSTEM ACTIVATION TRIGGERS The following is a list of typical system activation triggers · Parking barrier “Gate Open” output · Parking barrier safety loop activated output · Vehicle loop detector · Vehicle motion detector · Roll-up door “Open” contact · Sliding/swing gate “Open” contact · Beam detector activation output · Cash drawer open/close contact VISUAL ALERTS The sign has two visual alerts to draw the attention of pedestrians and street traffic warning of a vehicle exiting a facility. Flashing Amber LEDs - a conspicuous visual alert that provides a warning to drivers and pedestrians Backlit Text Message - the LED backlit text provides a clear message warning of a CAR COMING out of the facility. The backlit text message can optionally flash synchronized with the Flashing Amber LED by moving the wires from Output 1 to Output 2 AUDIBLE ALERT The audible alert is designed to provide either a clear voice message or sound file alerting nearby pedestrians who are distracted from the visual alerts, this is typical of pedestrians walking and using a mobile device. The audible alert has the ability to play any MP3 file. The file is stored on an onboard removable micro SD card that provides technicians and end users an easy path to modifying the file. The audible alert volume can be controlled by an onboard volume control dial. The system has an onboard sound amplifier and an integrated 30watt speaker is located at the bottom of the sign. The integrated controller provides an external speaker output to add additional speakers to the system if the ambient noise around the system is louder than 65db. TIMER CONTROLS The controller integrated into the system contains two timers for customization. Activation Timer - this timer is used to control the duration of activation of the system. The timer is controlled by a dial that allows a 5 ~ 60 second activation of the sign. Delay Activation Timer - this timer is used to provide a delay between trigger input and activation of the system. This timer is typically used when a vehicle has a longer than normal distance to travel from the trigger to the exit 2.03 FEATURES The following features are required in the Pedestrian Alert Safety System Ÿ Visual alert can be viewed 180º, from both sides and from the front of the sign. Ÿ A flashing amber alert providing a visual warning Ÿ A brightly backlit message indicating that a “CAR COMING” or “VEHICLE EXITING” Ÿ All lighting is LED weatherproof modules provide 50,000+ hours of service Ÿ A clear voice alert message indicating that “Attention. Vehicle Exiting.” Ÿ An integrated adjustable play activation timer from 5-60 seconds Ÿ An integrated delay activation timer from 0-30 seconds Ÿ An integrated speaker providing up to 65db Ÿ An integrated volume control Ÿ Sound files are can easily be changed by technician or end user Ÿ Sound files are MP3 format stored on a removable micro SD card Ÿ All integrated controls are solid state and without any mechanical points of failure Ÿ Activation input can accept a dry contact, 12VDC pulse, or 24VDC pulse 2.04 SPECIFICATIONS EnclosureShape: Prism Dimensions: 40”H x 10”sides Enclosure: 14 Gauge Steel Weight: 37lbs Viewing range: >180 FinishPowder Coating: Hammered Copper Textured Electrical Power115VAC~120VAC or 12VDC 2A Trigger InputsDry Contact, 12VDC, 24VDC Operating Temperature-20°F to 110°F (-29°C to 43°C)Operating Humidity0% to 90%Controller Power 12VDCController Outputs1 Steady, 1 Flashing (1 second on/1 second off) Volume Control0 to 65dbTimer ControlsActivation Timer 5~60 seconds, Delay Activation Timer 0~30 seconds Sound File FormatMP3Sound File StorageMicro SD cardMountingWall mount bottom of unit 76” from the ground 2.05 INSTALLATION The bottom of the system is surface mounted on walls at approximately 76” from the ground. The sign should be located no more than 12' from the exit of the facility. For exits over 30' wide it is recommended that two system signs be connected in tandem on either side of the exit. C C CAR COMING SIGN FOR PEDESTRIAN ALERT CAR COMING SIGN FOR PEDESTRIAN ALERT CAR COMING SIGN PEDESTRIAL ALERT SYSTEM Scale 3 16"=1'-0" CAR PARKING EXIT BARRIER CAR PARKING ENTRANCE BARRIER PARKING BARRIER ENTRANCE & EXIT 747 CAMBRIDGE ST., MASSACHUSSETS DATE: DESCRIPTION: REV: BY: Notes: REVISION: PROJECT NO: DRAWING NO: DRAWN: DATE: CHECKED: TITLE: SCALE AT A1: CLIENT: SITE: STATUS: ENGINEER: ENGINEERING STAMP: KRONOS CO. 235 MARGINAL ST CHELSEA MA 02150 A B C 1. THE COPYRIGHT OF THIS DRAWING IS VESTED IN KRONOS CO. AND IT MAY NOT BE REPRODUCED IN WHOLE OR PART OR USED FOR THE MANUFACTURE OF ANY ARTICLE WITHOUT THE EXPRESS PERMISSION OF THE COPYRIGHT HOLDERS. 2. WORK TO FIGURED DIMENSIONS ONLY. 3. THIS DRAWING IS TO BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECT'S, SERVICE ENGINEER'S AND KRONOS CO. DRAWINGS AND SPECIFICATIONS. EFFICIENCY ACCURACY TECHNOLOGY PERMIT SET KRONOS COLLABORATIVE 235 CHELSEA ST CHELSEA, MA 02150 PEDESTRIAN WARNING SYSTEM NB / JK NB / GDT 06-10-2021 NTS 2021-004 PWS-00 -- CAMBRIDGE AT MARION RESIDENCES

18.5’

UP UP RESIDENTIAL LOBBY MECHANICAL SPRINKLER DINING 1/2 BATH KITCHEN UNIT 1 FRAME FOR FUTURE WHEEL CHAIR LIFT COMMERCIAL SPACE BUILDING ABOVE BUILDING ABOVE BUILDING ABOVE EXT STORAGE UNDER STAIR BENCH PACAKAGES INTERCOM TRASH AND RECYCLING PANTRY PARKING SPACE #2 PARKING SPACE #3 PARKING SPACE #4 PARKING SPACE #8 PARKING SPACE #7 PARKING SPACE #6 PARKING SPACE #5 PARKING SPACE #1 ADA VAN ACCESSIBLE PARKING SPACE #9 PEDESTRIAN ALERT SYSTEM FOR PARKING GARAGES AND BLIND CORNERS CAR COMING PEDESTRIAN ALERT SAFETY SIGN PART 1 - GENERAL The intent of this document is to specify the minimum criteria for the design, supply, installation, and commissioning of a Pedestrian Alert Safety System used to notify pedestrians and street traffic of a vehicle exiting a parking facility or blind corner. 1.01 SUMMARY A CAR COMING Pedestrian Alert Safety System is designed to provide a clear visual and audible voice alert to pedestrian and street traffic when a vehicle is exiting a parking facility or blind corner. The alert system shall be self-contained with all controls of the system contained within the enclosure of the sign. The alert system shall be designed with aesthetics of the architecture of the facility in mind, and not to detract from the facility. 1.02 SYSTEM DESCRIPTION The CAR COMING Pedestrian Alert Safety System activates when a vehicle is detected exiting a parking facility. When activated the alert system provides a flashing amber alert, brightly backlit text indicating a “CAR COMING”, and a voice alert notifying nearby pedestrians. PART 2 - PRODUCTS 2.01 MANUFACTURED UNITS A.Model Number/Descriptions Table Pedestrian Alert System PASSCCCAR COMING, Pedestrian Alert Safety System with integrated PASS Controller Board. Mfg PASS Signs 2.02 TECHNICAL OVERVIEW The CAR COMING Pedestrian Alert Safety System activates when a vehicle is detected exiting a parking facility. When activated the alert system provides a flashing amber alert, brightly backlit text indicating a “CAR COMING”, and a voice alert notifying nearby pedestrians. SYSTEM ACTIVATION TRIGGERS The system can be activated by any detection device that has a normally open output contact that closes upon detection of the vehicle. Multiple devices, such as parking barriers or vehicle loop detectors, connected in parallel can be linked together to provide activation of the sign if any device detects a vehicle movement. TYPICAL SYSTEM ACTIVATION TRIGGERS The following is a list of typical system activation triggers · Parking barrier “Gate Open” output · Parking barrier safety loop activated output · Vehicle loop detector · Vehicle motion detector · Roll-up door “Open” contact · Sliding/swing gate “Open” contact · Beam detector activation output · Cash drawer open/close contact VISUAL ALERTS The sign has two visual alerts to draw the attention of pedestrians and street traffic warning of a vehicle exiting a facility. Flashing Amber LEDs - a conspicuous visual alert that provides a warning to drivers and pedestrians Backlit Text Message - the LED backlit text provides a clear message warning of a CAR COMING out of the facility. The backlit text message can optionally flash synchronized with the Flashing Amber LED by moving the wires from Output 1 to Output 2 AUDIBLE ALERT The audible alert is designed to provide either a clear voice message or sound file alerting nearby pedestrians who are distracted from the visual alerts, this is typical of pedestrians walking and using a mobile device. The audible alert has the ability to play any MP3 file. The file is stored on an onboard removable micro SD card that provides technicians and end users an easy path to modifying the file. The audible alert volume can be controlled by an onboard volume control dial. The system has an onboard sound amplifier and an integrated 30watt speaker is located at the bottom of the sign. The integrated controller provides an external speaker output to add additional speakers to the system if the ambient noise around the system is louder than 65db. TIMER CONTROLS The controller integrated into the system contains two timers for customization. Activation Timer - this timer is used to control the duration of activation of the system. The timer is controlled by a dial that allows a 5 ~ 60 second activation of the sign. Delay Activation Timer - this timer is used to provide a delay between trigger input and activation of the system. This timer is typically used when a vehicle has a longer than normal distance to travel from the trigger to the exit 2.03 FEATURES The following features are required in the Pedestrian Alert Safety System Ÿ Visual alert can be viewed 180º, from both sides and from the front of the sign. Ÿ A flashing amber alert providing a visual warning Ÿ A brightly backlit message indicating that a “CAR COMING” or “VEHICLE EXITING” Ÿ All lighting is LED weatherproof modules provide 50,000+ hours of service Ÿ A clear voice alert message indicating that “Attention. Vehicle Exiting.” Ÿ An integrated adjustable play activation timer from 5-60 seconds Ÿ An integrated delay activation timer from 0-30 seconds Ÿ An integrated speaker providing up to 65db Ÿ An integrated volume control Ÿ Sound files are can easily be changed by technician or end user Ÿ Sound files are MP3 format stored on a removable micro SD card Ÿ All integrated controls are solid state and without any mechanical points of failure Ÿ Activation input can accept a dry contact, 12VDC pulse, or 24VDC pulse 2.04 SPECIFICATIONS EnclosureShape: Prism Dimensions: 40”H x 10”sides Enclosure: 14 Gauge Steel Weight: 37lbs Viewing range: >180 FinishPowder Coating: Hammered Copper Textured Electrical Power115VAC~120VAC or 12VDC 2A Trigger InputsDry Contact, 12VDC, 24VDC Operating Temperature-20°F to 110°F (-29°C to 43°C)Operating Humidity0% to 90%Controller Power 12VDCController Outputs1 Steady, 1 Flashing (1 second on/1 second off) Volume Control0 to 65dbTimer ControlsActivation Timer 5~60 seconds, Delay Activation Timer 0~30 seconds Sound File FormatMP3Sound File StorageMicro SD cardMountingWall mount bottom of unit 76” from the ground 2.05 INSTALLATION The bottom of the system is surface mounted on walls at approximately 76” from the ground. The sign should be located no more than 12' from the exit of the facility. For exits over 30' wide it is recommended that two system signs be connected in tandem on either side of the exit. C CAR COMING SIGN FOR PEDESTRIAN ALERT CAR COMING SIGN PEDESTRIAL ALERT SYSTEM Scale 3 16"=1'-0" CAR PARKING EXIT BARRIER CAR PARKING ENTRANCE BARRIER PARKING BARRIER ENTRANCE & EXIT 747 CAMBRIDGE ST., MASSACHUSSETS DATE: DESCRIPTION: REV: BY: Notes: REVISION: PROJECT NO: DRAWING NO: DRAWN: DATE: CHECKED: TITLE: SCALE AT A1: CLIENT: SITE: STATUS: ENGINEER: ENGINEERING STAMP: KRONOS CO. 235 MARGINAL ST CHELSEA MA 02150 A B C 1. THE COPYRIGHT OF THIS DRAWING IS VESTED IN KRONOS CO. AND IT MAY NOT BE REPRODUCED IN WHOLE OR PART OR USED FOR THE MANUFACTURE OF ANY ARTICLE WITHOUT THE EXPRESS PERMISSION OF THE COPYRIGHT HOLDERS. 2. WORK TO FIGURED DIMENSIONS ONLY. 3. THIS DRAWING IS TO BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECT'S, SERVICE ENGINEER'S AND KRONOS CO. DRAWINGS AND SPECIFICATIONS. EFFICIENCY ACCURACY TECHNOLOGY PERMIT SET KRONOS COLLABORATIVE 235 CHELSEA ST CHELSEA, MA 02150 PEDESTRIAN WARNING SYSTEM NB / JK NB / GDT 06-10-2021 NTS 2021-004 PWS-00 -- CAMBRIDGE AT MARION RESIDENCES

UP UP RESIDENTIAL LOBBY MECHANICAL SPRINKLER DINING 1/2 BATH KITCHEN UNIT 1 FRAME FOR FUTURE WHEEL CHAIR LIFT COMMERCIAL SPACE BUILDING ABOVE BUILDING ABOVE BUILDING ABOVE EXT STORAGE UNDER STAIR BENCH PACAKAGES INTERCOM TRASH AND RECYCLING PANTRY PARKING SPACE #2 PARKING SPACE #3 PARKING SPACE #4 PARKING SPACE #8 PARKING SPACE #7 PARKING SPACE #6 PARKING SPACE #5 PARKING SPACE #1 ADA VAN ACCESSIBLE PARKING SPACE #9 PEDESTRIAN ALERT SYSTEM FOR PARKING GARAGES AND BLIND CORNERS CAR COMING PEDESTRIAN ALERT SAFETY SIGN PART 1 - GENERAL The intent of this document is to specify the minimum criteria for the design, supply, installation, and commissioning of a Pedestrian Alert Safety System used to notify pedestrians and street traffic of a vehicle exiting a parking facility or blind corner. 1.01 SUMMARY A CAR COMING Pedestrian Alert Safety System is designed to provide a clear visual and audible voice alert to pedestrian and street traffic when a vehicle is exiting a parking facility or blind corner. The alert system shall be self-contained with all controls of the system contained within the enclosure of the sign. The alert system shall be designed with aesthetics of the architecture of the facility in mind, and not to detract from the facility. 1.02 SYSTEM DESCRIPTION The CAR COMING Pedestrian Alert Safety System activates when a vehicle is detected exiting a parking facility. When activated the alert system provides a flashing amber alert, brightly backlit text indicating a “CAR COMING”, and a voice alert notifying nearby pedestrians. PART 2 - PRODUCTS 2.01 MANUFACTURED UNITS A.Model Number/Descriptions Table Pedestrian Alert System PASSCCCAR COMING, Pedestrian Alert Safety System with integrated PASS Controller Board. Mfg PASS Signs 2.02 TECHNICAL OVERVIEW The CAR COMING Pedestrian Alert Safety System activates when a vehicle is detected exiting a parking facility. When activated the alert system provides a flashing amber alert, brightly backlit text indicating a “CAR COMING”, and a voice alert notifying nearby pedestrians. SYSTEM ACTIVATION TRIGGERS The system can be activated by any detection device that has a normally open output contact that closes upon detection of the vehicle. Multiple devices, such as parking barriers or vehicle loop detectors, connected in parallel can be linked together to provide activation of the sign if any device detects a vehicle movement. TYPICAL SYSTEM ACTIVATION TRIGGERS The following is a list of typical system activation triggers · Parking barrier “Gate Open” output · Parking barrier safety loop activated output · Vehicle loop detector · Vehicle motion detector · Roll-up door “Open” contact · Sliding/swing gate “Open” contact · Beam detector activation output · Cash drawer open/close contact VISUAL ALERTS The sign has two visual alerts to draw the attention of pedestrians and street traffic warning of a vehicle exiting a facility. Flashing Amber LEDs - a conspicuous visual alert that provides a warning to drivers and pedestrians Backlit Text Message - the LED backlit text provides a clear message warning of a CAR COMING out of the facility. The backlit text message can optionally flash synchronized with the Flashing Amber LED by moving the wires from Output 1 to Output 2 AUDIBLE ALERT The audible alert is designed to provide either a clear voice message or sound file alerting nearby pedestrians who are distracted from the visual alerts, this is typical of pedestrians walking and using a mobile device. The audible alert has the ability to play any MP3 file. The file is stored on an onboard removable micro SD card that provides technicians and end users an easy path to modifying the file. The audible alert volume can be controlled by an onboard volume control dial. The system has an onboard sound amplifier and an integrated 30watt speaker is located at the bottom of the sign. The integrated controller provides an external speaker output to add additional speakers to the system if the ambient noise around the system is louder than 65db. TIMER CONTROLS The controller integrated into the system contains two timers for customization. Activation Timer - this timer is used to control the duration of activation of the system. The timer is controlled by a dial that allows a 5 ~ 60 second activation of the sign. Delay Activation Timer - this timer is used to provide a delay between trigger input and activation of the system. This timer is typically used when a vehicle has a longer than normal distance to travel from the trigger to the exit 2.03 FEATURES The following features are required in the Pedestrian Alert Safety System Ÿ Visual alert can be viewed 180º, from both sides and from the front of the sign. Ÿ A flashing amber alert providing a visual warning Ÿ A brightly backlit message indicating that a “CAR COMING” or “VEHICLE EXITING” Ÿ All lighting is LED weatherproof modules provide 50,000+ hours of service Ÿ A clear voice alert message indicating that “Attention. Vehicle Exiting.” Ÿ An integrated adjustable play activation timer from 5-60 seconds Ÿ An integrated delay activation timer from 0-30 seconds Ÿ An integrated speaker providing up to 65db Ÿ An integrated volume control Ÿ Sound files are can easily be changed by technician or end user Ÿ Sound files are MP3 format stored on a removable micro SD card Ÿ All integrated controls are solid state and without any mechanical points of failure Ÿ Activation input can accept a dry contact, 12VDC pulse, or 24VDC pulse 2.04 SPECIFICATIONS EnclosureShape: Prism Dimensions: 40”H x 10”sides Enclosure: 14 Gauge Steel Weight: 37lbs Viewing range: >180 FinishPowder Coating: Hammered Copper Textured Electrical Power115VAC~120VAC or 12VDC 2A Trigger InputsDry Contact, 12VDC, 24VDC Operating Temperature-20°F to 110°F (-29°C to 43°C)Operating Humidity0% to 90%Controller Power 12VDCController Outputs1 Steady, 1 Flashing (1 second on/1 second off) Volume Control0 to 65dbTimer ControlsActivation Timer 5~60 seconds, Delay Activation Timer 0~30 seconds Sound File FormatMP3Sound File StorageMicro SD cardMountingWall mount bottom of unit 76” from the ground 2.05 INSTALLATION The bottom of the system is surface mounted on walls at approximately 76” from the ground. The sign should be located no more than 12' from the exit of the facility. For exits over 30' wide it is recommended that two system signs be connected in tandem on either side of the exit. C CAR COMING SIGN FOR PEDESTRIAN ALERT CAR COMING SIGN PEDESTRIAL ALERT SYSTEM Scale 3 16"=1'-0" CAR PARKING EXIT BARRIER CAR PARKING ENTRANCE BARRIER PARKING BARRIER ENTRANCE & EXIT 747 CAMBRIDGE ST., MASSACHUSSETS DATE: DESCRIPTION: REV: BY: Notes: REVISION: PROJECT NO: DRAWING NO: DRAWN: DATE: CHECKED: TITLE: SCALE AT A1: CLIENT: SITE: STATUS: ENGINEER: ENGINEERING STAMP: KRONOS CO. 235 MARGINAL ST CHELSEA MA 02150 A B C 1. THE COPYRIGHT OF THIS DRAWING IS VESTED IN KRONOS CO. AND IT MAY NOT BE REPRODUCED IN WHOLE OR PART OR USED FOR THE MANUFACTURE OF ANY ARTICLE WITHOUT THE EXPRESS PERMISSION OF THE COPYRIGHT HOLDERS. 2. WORK TO FIGURED DIMENSIONS ONLY. 3. THIS DRAWING IS TO BE READ IN CONJUNCTION WITH ALL RELEVANT ARCHITECT'S, SERVICE ENGINEER'S AND KRONOS CO. DRAWINGS AND SPECIFICATIONS. EFFICIENCY ACCURACY TECHNOLOGY PERMIT SET KRONOS COLLABORATIVE 235 CHELSEA ST CHELSEA, MA 02150 PEDESTRIAN WARNING SYSTEM NB / JK NB / GDT 06-10-2021 NTS 2021-004 PWS-00 -- CAMBRIDGE AT MARION RESIDENCES