An application was received from the Harvard Square Business Association requesting permission for a temporary lighted banner across the Public Way located at 12 Palmer Street

City of Cambridge Sidewalk Business Use Banner Petition SBU-067749-2018 To the honorable, the City Council of the City of Cambridge The undersigned respectfully pray 1/29/2018 Applied: 4/19/2018 Harvard Square Business Association Located at Denise Jillson 18 Brattle St, Cambridge, MA 02133 Name of Petitioner or Business Address Be granted permission for a banner hung across the Public Way located at: 12 Palmer St Description: The Harvard Square Business Association is requesting permission to hang a lighted banner over Palmer St underneath the Sky Bridge at the Harvard Coop. The address of the banner location is 12 Palmer St. The HSBA has received approval from the Harvard Coop and the artist designing the banner is Ross Miller. Departmental Reviews: Cambridge Arts and Department of Public Works have reviewed the attached plan and is supportive of this project. Petitioner: Denise Jillson [phone removed] Phone: Email: [email removed]

Palmer Street, Cambridge lighting sculpture • concept details for review • v. 4.3 [page 1 of 7] RMS, Inc. 3.26.18 PROJECT Sculptural lighting for Palmer Street - inspired by the play of free-form contour line drawing. Continuous lines of light trace gentle loops, improvised curves and swirls, supported within a net matrix. This installation is created using a new type of full color RGB chip LED light source embedded in a flexible weatherproof silicone extrusion. Color adjustments within individual lines may be made manually with a wireless remote. Color variations may be selected to mark special occasions, or shift seasonally. The diffused LED sources of the installation produce enough lumens to provide an overspill of color light creating a glow against adjacent brick walls. The artwork is centrally positioned at the dark mid-point of Palmer Street, drawing the eye, and the viewer, in from both Church and Brattle Streets. At this time no automatic programming is planned. One can imagine a system with complicated sequences and patterns, driven by micro- processor controls, and at a much greater cost for fixtures, electronics and software. However, the intent of this project is to engage the space with light in a surprising yet gentle and calm way, rather than with flashy whiz- bang graphics. The hope is for the artwork to be discovered as a delightful moment within a drab alleyway. Sometimes as foreground, at other moments becoming part of the background. Something to be enjoyed and lived with on a daily basis.


 Original study of 3 potential locations. (shown for location, not specific design) The issue here is that the sites at Church Street and close to Brattle Street require coordination with different owners (other than the Coop). In addition the building facades will not safely support cable attachments, and/or do not provide sufficient height for mounting above required roadway clearance dimensions. Preferred installation location, under the skybridge. In this location power is available, and both sides are under Coop ownership. However, new cable attachment points are needed at each side. The existing single point eye bolts are rusting, improperly installed, and do not provide any safety loop back-up. Palmer Street, Cambridge lighting sculpture • concept details for review • v. 4.3 [page 2 of 7] RMS, Inc. 3.26.18 existing power outlets - available to use building to building 25’-0” at narrow point

PALMER ST Cambridge, MA LOCATION LAYO | ARTWORK LIGHTING INSTALLATIO CONCEPT LAYOU
 Palmer Street, Cambridge lighting sculpture • concept details for review • v. 4.3 [page 3 of 7] RMS, Inc. 3.26.18 Power feed connection to net display on this side with connection into surface mounted NEMA-4 box
 All lights in net structure 
 are low voltage LED 
 Top anchor bolts - 
 (1) primary with (2) safety 
 Rigging and electrical connection by Aetna Corp. Cambridge.
 Support cable attachment point 6” down from underside of Sky bridge Field verify all dimensions as required Note: MassDot legal dimensional height maximum for semi-trailers on turnpike and (newer) tunnels is 13’-6” PLAN VIEW Sky bridge between Coop Buildings Display net: 24’ W x 5’ H ELEVATION 
 (view into PALMER ST from BRATTLE ST) LOCATION LAYOUT v.2.3 FOR REVIEW 1.28.18 Clearance of 16’-6” 
 allows for sag of (1) foot 
 above 15’-6” height 
 (dimensional recommendation from 
 Cambridge Electrical Department Bottom tie-back eye hook


 Palmer Street, Cambridge
 lighting sculpture • concept details for review • v. 4.3 [page 4 of 7] RMS, Inc. 3.26.18 Design Development Layer 1 Design Development Layer 2


 Palmer Street, Cambridge lighting sculpture • concept details for review • v. 4.3 [page 5 of 7] RMS, Inc. 3.26.18 Design Development Layer 3 Design Development Layer 4


 Palmer Street, Cambridge lighting sculpture • concept details for review • v. 4.3 [page 6 of 7] RMS, Inc. 3.26.18 Palmer Street patterns study of lengths and designs from RGB linear LED lighting source, the intent is to have layers of contours line drawings, that may be cycled on and off to change the pattern and colors -> seasonally, for events, etc. net = 24' x 5'-8" 1/4" - 1'-0" blue 131' (40 M) orange 65' (20 M) net = 24' x 5'-8" 1/4" - 1'-0" red 65' (20) magenta 65' (20 M) Design Development w / run lengths Design Development w / run lengths

full size line modeling in the studio Palmer Street, Cambridge lighting sculpture • concept details for review • v. 4.3 [page 7 of 7] RMS, Inc. 3.26.18 color examples color glow on walls Note: Final design details will be developed on the full scale piece in the studio, available for review if desired, prior to installation. Design Development full size mock ups